Residual Oxygen Meter / Iijima Electronics Corporation
Product Videos
PACKKEEPER / PACKMASTER / PACKLEADER
You can watch videos about our products on YouTube. Click the image or title of the product to link to the video.
Checking for Clogging
Introducing the overview and procedure of the "Checking of clogging" function of the Residual Oxygen Meter model RO-105S series. For the clogging check, an internal pressure sensor is used to check the clogging of the gas path, and if negative pressure is detected, it is determined that there is clogging in the gas path.
Preparing for Use and Operation Methods
Introduces the basic operating method of the Residual Oxygen Meter RO-105S series, like how to calibrate or how to measure.
Measuring with the QUICK SAMPLER
Introduces how to use the optional "QUICK SAMPLER Model:PO-1/PO-2". Easier to measure without the need to attach adhesive rubber.
Measuring with the Gas Sampling Glass Tube
Introduces how to use the optional "Gas Sampling Glass Tube Model:GS-2".
Types of Consumable Parts and Replacement Methods
Introduces the types of consumable parts for the RO-105 series and how to replace them.
Replacing the Oxygen sensor
Introduces the display guidance when the oxygen sensor is nearing the end of its service life and the procedure for replacing it with a new part.
Perfect Oxygen Meter for MAP
Introduces the purpose and examples of MAP, and the effects of replacing with nitrogen gas and carbon dioxide gas, and how our oxygen meters can be used.
